08
CURE YOUR APPLIANCE WHEN NEEDED
If a fault occurs, before calling the after-sales service, please ensure
that is not because of incorrect operations and refer to the fault table,
attempt to correct the fault yourself. You can often easily rectify
technical faults on the appliance yourself.
If a dish does not turn out exactly as you wanted, you can find many
tips and instructions for preparation at the end of the operating
manual.
Fault Possible Cause Notes/remedy
The appliance
does not work.
Knobs have
fallen out of the
support in the
control panel.
Knobs can no
longer be
turned easily.
Faulty fuse.
Power cut
Check the circuit breaker in the
fuse box.
Check whether the kitchen light or
other kitchen appliances are working.
Knobs have
been acci-
dentally
disengaged.
Knobs can be removed.
Simply place knobs back in their
support in the control panel and
push them in so that they engage
and can be turned as usual.
There is dirt
under knobs
Knobs can be removed.
To disengage knobs, simply
remove them from the support.
Alternatively, press on the outer
edge of knobs so that they tip
and can be picked up easily.
Carefully clean the knobs using
a cloth and soapy water.
Dry with a soft cloth.
Do not use any sharp or abrasive
materials.
Do not soak or clean in the dishwasher.
Do not remove knobs too often
so that the support remains stable
To Next Page
Loading...
