Indoor Unit Disassembly 7
Procedure Illustration
9) Release the hooks with hands. (see
CJ_AB_INV_009)
10) Release the 5 hooks in the back (see
CJ_AB_INV_010).
11) Pull out the panel frame while
pushing the hook through a clearance
between the panel frame and the heat
exchanger. (see CJ_AB_INV_011)
CJ_AB_INV_009
CJ_AB_INV_010
CJ_AB_INV_011
Note: This section is for reference only. Actual unit appearance may vary.
To Next Page
Loading...
