EN-13
10. Reservation Function
• To use reservation function, clock must be set in advance. Then, in the way of
setting the clock, reserved time that oven starts to cook must be set:
a> Press reservation setting button "
";
b> Rotate " K2 " to set the hour time of reservation. Time should be within 0--23.
c> Press reservation setting button "
" again;
d> Rotate " K2 " to set minute time of reservation. Time should be within 0--59.),
but don't press clock this time. Next, turn knob " K1 " to chosse function.
• Press "
" button to set cooking time and temperature. Then turn knob " K1 "
to adjust time, and " K2 " to adjust temperature.
• Press the "
screen with reservation sign " " always lighting. But no other function signals
are presented. Reservation time can be checked by pressing "
", 3 seconds
later the screen will show clock again.
• At the time of reservation, cooking will start automatically after a buzzing
sound. The reservation symbol "
" will put out, and other indicating signs will
work normally.
Note
to reservation status.
• Reminder function is invalid during reservation status.
function)
OPERATION
INSTRUCTIONS
To Next Page
Loading...
