EN-12
7. Start/Pause/Cancel Function
• If the cooking time has been set, press "
" to start cooking.
If the cooking is paused, press "
" to resume cooking.
• During cooking process, press "
" once to pause the cooking.
Press "
" twice to cancel the cooking.
8. Energy-Saving Function
• In waiting state and reminding state , press "
" for three seconds, the LED
display will go off and set to energy-saving mode.
• If no operation in 10 minutes under waiting state, the LED display will go off
and go into energy-saving mode.
• Under the energy-saving mode, press any key or rotate any knob can quit the
energy-saving mode.
9. Pyrolytic Function
This function allows you to clean thoroughly the oven cavity.
• Rotate " K1" to select the pyrolytic function. LED will display " PyR ".
• Press "
display on the LED.
• Rotate " K1" to change the pyrolytic time. The timer can be set 1:30 or 2:00
hours.
Note
LED will display " door " and " PyR ".
• When the oven's center temperature is highter than 320O C, pressing start
• Open the door when the oven is working, the LED will display " door " and
• Before activating the pyrolytic cleaning function, remove any excessive
spillage and make sure that oven is empty. Do not leave anything inside it
damage them.
OPERATION
INSTRUCTIONS
To Next Page
Loading...
