Service Manual, 2017-02
11 / 31
2) Remove the up door.
Unscrew screws.
Remove the middle hinge, Insert pins and
hole cover.
3) Remove the bottom door.
Unscrew screws and levelling feet.
Remove the lower hinge adjust feet
assembly.
4) Fix the levelling feet, lower hinge adjust
feet assembly and screws in the opposite
side.
5) Place the bottom door.
Place and fix the the middle hinge. Fix the
Insert pins and hole cover.
6) Place the up door.
Place and fix the the upper hinge. Fix the
hinge cover, Insert pins and hole cover.
To Next Page
Loading...
