EasyManua.ls Logo

Midea COMBI HD-273FN - Compressor Case

Midea COMBI HD-273FN
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Manual_2018-V2.0
23
There is a light switch on the side wall of the refrigerating
chamber.1Loosen the hook with small normal
screwdriver and pull out the switch until the wire
connector reveals.
8.4Compressor case
Rear cover (None)
Compressor and the cooling system pipe
1Cut off the power, remove the goods in the
refrigerator, with the tape to make the door fixed firmly
and prevent the door dropping when the refrigerator
dumping.
2Slowly tilt the refrigerator forward, relying on the wall
or a solid enough object, leaving space to facilitate the
operation. For safety, it should be carried by someone to
prevent its falling.
3Cut off the compressor pipeline.-Cut off the
process pipeline.-Cut off the low-pressure
muffler.-Cut off the high-pressure exhaust pipe.

Related product manuals