EasyManua.ls Logo

Midea COMBI HD-273FN - Function and Operation; Temperature Setting

Midea COMBI HD-273FN
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Manual_2018-V2.0
29
10. Function and operation
10.1 Operation panel(None)
10.2 Temperature settingTurn the temperature control knob to MAX, the internal temperature of the
refrigerator becomes lower.
Turn the temperature control knob to MIN, the internal temperature of the refrigerator becomes higher.
NOTE: Please adjusting and using between "MAX" and "MIN"
10.3 Open door alarm(None)
When refrigerator door or freezer door is open, the display panel is light on.there is no notification tone
when open door; if refrigerator door or freezer door is open last for 120s, there will be buzzer alarm,
afterwards give alarm one time per second, press any buttons on control panel can cancel this buzzer
alarm.
Note: under the situation of the refrigerator compartment turn off, the door switch and internal lamp works
properly.
Note: When open the door, the display panel is light on; when the door is closed, the display panel will be
light off after 30s if there is no any operation on display panel
10.4 Defrosting function
Manual defrost
10.5 Test mode(None)
10.6Backup data for power fail(None)
1) The running state of the refrigerator is remembered after compressor running for 1 hour continuously.
2) The running state of the refrigerator is remembered after change function settings and lock.When the
refrigerator is out of power and recharged, the running state of the refrigerator is same as before.

Related product manuals