Midea HC-808WE - Page 10

Service Manual_2020-V1.0
10
3）Take down the left (right) hinge.
4）Uplift the right/left cooler door according to the
direction of arrow, and take it down from the left (right)
middle hinge;
5）First of all, remove the 6 screws indicated by the red
arrow in the diagram;
6）Take down the terminal cover, remove the screws
indicated by the arrow, unplug the wiring terminal, take
off the variable temperature chamber door; the
disassembly operation for the lower freezing door is the
same;
7) Reverse operation to complete installation