Service Manual_2020-V1.0
9
3. Installation and commissioning
3.1 Handling
1) Protect the refrigerator in moving it,Same as shown
as left photo, please move it by handcart with cushion
2) Remove all packing materials and bottom cushion,
the move into house for placement
3) After moving it to appropriate location, wait for 2 hou
rs before power on.
3.2 Door Disassembly and Assembly
When the whole refrigerator cannot enter the room, the door can be disassembled, then
assembled after entering separately.
1）In the state of refrigerator door closure, use
screwdriver to remove the 3 fixed screws, and then
removes the upper hinge cover.
2） During left (right) door disassembly, unplug the
harness plug at the left (right) side and the water pipe
connector, remove the fixed screw at left (right) side of
the hinge.
To Next Page
Loading...
