Midea HC-808WE - Welding Points in Chambers or Foam Layer

Service Manual_2020-V1.0
25
6.4 Welding points in chambers or foam layer
1）Welding points on fridge evaporator
Welding point
Pipe outer diameter (mm)
1-Fridge capillary and inlet of evaporator
Copper pipe: Φ6.0
Copper pipe: Φ7.5
2-Heat transition tube and outlet of evaporator
Copper pipe: Φ6.35
Copper pipe: Φ7.5
2）Welding points on freezer evaporator
Welding point
Pipe outer diameter (mm)
1-Freezer capillary and inlet of evaporator
Copper pipe: Φ6.35
Copper pipe: Φ6.5
2-Heat transition tube and outlet of evaporator
Copper pipe: Φ6.35
Copper pipe: Φ6.5
3）Welding points on ice maker evaporator.