Service Manual_2020-V1.0
13
3.7 Installation of door lock（None）
3.8 Adjustment to level the door
Adjustment to level the door (Up and down)
Stuff the adjusting gasket in the hinge under the door to
be adjusted, so that the height of the left and right doors
can be consistent.
Adjustment to inhomogenous aperture the door (Up and down)
1）Use screwdriver to remove the 3 fixed screws, and
then remove the upper hinge cover.
2）Loose the screw on the hinge block, make right and
left adjustment for the upper hinge to insure the door
aperture to be homogeneous.
3）Put the hinge cover on suitable position, and then use
the screwdriver to fix the 3 fixed screws.
Adjustment to plane the door (left and right)
1）Use screwdriver to remove the 3 fixed screws, and
then remove the upper hinge cover.2）Loose the screw
on the hinge block, make back-and-forth adjustment for
the upper hinge to insure the door aperture to be
homogeneous.
3）Put the hinge cover on suitable position, and then use
the screwdriver to fix the 3 fixed screws.
To Next Page
Loading...
