Midea HC-808WE User Manual

Service Manual_2020-V1.0
28
1） Remove the 2 screws indicated by the arrow;
2）Push the bottom upwards , then separate the rollover
beam components from door;
3）Disconnect the wiring connector, then replace the
rollover beam.
Door stopper
After removing the refrigeration door, remove the fixing
screws at the position shown in the figure, remove the
door self-locking and block, and complete the self-locking
replacement.

Midea HC-808WE Specifications

General

Brand	Midea
Model	HC-808WE
Category	Refrigerator
Language	English