14 15
www.freedomhp.co.uk 02380 274 833 | sales@freedomhp.co.uk
Field settings A glance of the user interface
Restore Factory Settings
If you mess up the controller you can restore it to factory.
The RESTORE FACTORY SETTING is used to restore all the parameters
set in the user interface to the factory setting.
Go to MENU
FOR SERVICEMAN 10.RESTORE FACTORY SETTINGS.
Press OK. The following page will be displayed:
Press
to scroll the cursor to YES and press OK.
The following page will be displayed:
10 RESTORE FACTORY SETTINGS
All the settings will come back to
factory default.
Do you want to restore factory
settings?
OK CONFIRM
NO YES
Please wait…
5%
10 RESTORE FACTORY SETTINGS
Enter the menu
structure from
the home page
Navigate the
cursor on the
display/navigate
in the menu
structure/adjust
the settings
Come back to
the up level
Turn on or off the
space operation
mode or DHW
mode turn on or
off the function
in the menu
structure
Long press for
unlocking /locking
the controller
Go to the next step when programming a
schedule in the menu structure/ confirm
a selection/enter a submenu in the menu
structure
At the next scheduled action,
the desired temp. will decrease.
the desired temp.
will not change.
the desired temp.
will decrease.
the desired temp.
will increase.
ECO mode
is activated
Holiday away
/home
is activated
7
Silent mode
is activated
Tank heater is activated
The solar energy is activated
Fan coil
The floor heating
Water flow desired temp.
Radiator
Fan coil Radiator
The compressor is activated
Turn off
Turn on
OFF
Heat mode
Cool mode
Auto mode
Timer icon
Lock icon
Outdoor ambient temp.
WLAN icon
The disinfect
function is activated
Domestic hot water
ON
DHW tank temp.
Error or protection icon
OFF
ON
Weekly schedule icon
Domestic hot water
Prevent
freezing mode
is activated
Defrost mode
is activated
Smart grid icon
Smart grid
Free electricity
The pumpi is activated
Valley electricity
Peak electricity
Additional heat source
Additional heat source
Electric pipe heat source
Room desired temp.
The floor heating
To Next Page
Loading...
Need help?
General