Remote Control
Instructions
31
Example: Unit set to turn off after 5 hours.
The TIMER OFF function allows you to set a period of
time after which the unit will automatically turn off for
instance when you wake up.
NOTE: When setting the TIMER ON or TIMER OFF
functions up to 10 hours, the time will increase in 30-min-
ute increments with each press. After 10 hours and up to
24 hours, it will increase in 1-hour increments. The timer
will revert to zero after 24 hours.
You can turn off either function by setting the timer to
0.0h.
1.
2.
3.
Press the TIMER OFF button. By default, the last
time period that you set and an "h" (indicating
hours) will appear on the display.
Note: This number indicates the amount of time
after the current time that you want the unit to
turn off.
For example, if you set TIMER OFF for 2 hours
(2.0 h) will appear on the screen and the unit will
turn off after 2 hours.
Press the TIMER OFF button repeatedly to set the
time when you want the unit to turn off.
Wait 2 seconds, then the TIMER OFF function will
be activated. Your remote controller digital
display will then go back to the temperature
display.
TIMER OFF Function
2 s
x10
ON/OFF
MODE
FAN
SHORT
CUT
TIMER ON
TIMER OF
F
TEMP
S
L
EEP
1 s
1
3
2
4
TIMER OFF
TIMER OFF
Continue to press
TIMER ON or
TIMER OFF until
the desired time is
reached.
To Next Page
Loading...
