Remote Control
Instructions
30
This feature can be activated from the remote control
ONLY. To activate SLEEP feature, the set temperature
will increase(cooling) or decrease(heating) by 1°C/2°F
(or 1°F) in 30 minutes. The set temperature will then
increase(cooling) or decrease(heating) by another 1°C
/2°F (or 1°F) after an additional 30 minutes. This new
temperature will be maintained for 7 hours before it
thermostat allowing for the precise temperature
control at its location. To activate the Follow Me/Temp
Sensing feature, point the remote control towards the
unit and press the Follow Me/Temp Sensing button.
The remote control will send this signal to the air
conditioner until press the Follow Me/Temp Sensing
button again. If the unit does not receive the Follow
Me/Temp Sensing signal during any 7 minutes interval,
the unit will exit the Follow Me/Temp Sensing mode.
Example: Unit set to turn on after 2.5 hours.
Your air conditioning unit has two timer-related
functions:
TIMER ON- sets the amount of time after which the unit
will automatically turn on.
TIMER OFF- sets the amount of time after which the unit
will automatically turn off.
The TIMER ON function allows you to set a period of time
after which the unit will automatically turn on, for
instance when you come home from work.
1.
2.
3.
Press the TIMER ON button. By default, the last
time period that you set and an "h" (indicating
hours) will appear on the display.
Note: This number indicates the amount of time
after the current time that you want the unit to
turn on.
For example, if you set TIMER ON for 2 hours (2.0
h) will appear on the screen and the unit will turn
on after 2 hours.
Press the TIMER ON button repeatedly to set the
time when you want the unit to turn on.
Wait 2 seconds, then the TIMER ON function will
be activated. Your remote controller digital
display will then go back to the temperature
display.
TIMER ON Function
Setting the TIMER Function
2 s
ON/OFF
MODE
FAN
SHORT
CUT
TIMER ON
TIMEROF
F
TEMP
S
L
E
EP
1 s
x5
1
3
2
4
TIMER ON TIMER ON
To Next Page
Loading...
