Midea MCD1-24HRFNX - How to Use Basic Functions; Basic Operation

How to Use Basic Functions
ATTENTION! Before operation, please
ensure the unit is plugged in and power
is available.
AUTO Mode
SETTING TEMPERATURE
The operating temperature range for units is
16-30°C (60-86°F).
You can increase or decrease the set
temperature in 0.5°C (1°F) increments.
In AUTO mode, the unit will automatically select
the COOL, FAN, or HEAT operation based on the
set temperature.
NOTE: FAN SPEED can’t be set in AUTO mode.
COOL Mode
Swing
Boost
Vane
Swing
Boost
Vane
Basic operation
1
3
2
1
3
2
4
1. Press the MODE button to select COOL
mode.
2. Set your desired temperature using the
TEMP or TEMP button.
3. Press FAN button to select the fan speed
in a range of AU-100%.
4. Press the ON/OFF button to start the unit.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the
TEMP or TEMP button.
3. Press the ON/OFF button to start the unit.