1: Open the screw
cover and twist out
the screw.
2: Press the buttons
on both sides to pull
out the air inlet
frame.
Separate the frame from the filter assembly.
Clean filter assembly.
Take out the fresh air filter.
(Optional )Please note that
the fresh air filter cannot be
cleaned with water. It is
recommended to replace it
regularly.
Remove the air filter.
Cleaning Your Indoor Unit(Air Filter)
CLEANING AND MAINTENANCE
，
Make sure to clean the filter every two weeks.
• Always TURN OFF your AC system and disconnect its power supply before cleaning or
maintenance.
• Only use a soft, dry cloth to wipe the unit clean. You can use a cloth soaked in warm water to wipe
it clean if the unit is especially dirty.
• Do not use chemicals or chemically treated cloths to clean the unit
• Do not use benzene, paint thinner, polishing powder or other solvents to clean the unit. They can
cause the plastic surface to crack or deform.
• Do not use water hotter than 40°C (104°F) to clean the front panel. This can cause the panel to
deform or become discolored.
CAUTION
Step 1：
Step 2：
Step 3：
55
WARNING
Removing and cleaning the filter can be dangerous. Removal and maintenance must be performed
by a certified technician.
Rinse the filter with clean water and allow it
to air-dry. DO NOT let the filter dry in direct
sunlight.
Reinstall the filter.
Clean the air filter by vacuuming the surface
or washing it in warm water with mild
detergent.
If using a vacuum cleaner, the
inlet side should face the vacuum.
If using water, the inlet side should
face down and away from the
water stream.
To Next Page