EasyManuals Logo
Home>Midea>Dehumidifier>MDDG-20DEN7-QA3

Midea MDDG-20DEN7-QA3 User Manual

Midea MDDG-20DEN7-QA3
11 pages
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
TROUBLESHOOTING TIPS
Before calling for service, review the chart below first yourself.
Problem
What to check
Unit does not start
Make sure the dehumidifier s plug is pushed completely
into the outlet.
Check the house fuse/circuit breaker box.
Dehumidifier has reached its preset level or bucket is full.
Water bucket is not in the proper position.
Dehumidifier does not
dry the air as it should
Did not allow enough time to remove the moisture.
Make sure there are no curtains, blinds or furniture
blocking the front or back of the dehumidifier.
The humidity control may not be set low enough.
Check that all doors, windows and other openings are
securely closed.
O O
Room temperature is too low, below 5 C(41 F).
There is a kerosene heater or something giving off
water vapor in the room.
,
The unit makes a loud
noise when operating
The air filter is clogged.
The unit is tilted instead of upright as it should be.
The floor surface is not level.
Frost appears on the
coils
This is normal. The dehumidifier has Auto defrost
feature.
Water on floor
Hose to connector or hose connection may be loose.
Intend to use the bucket to collect water, but the back
drain plug is removed.
ES, AS or P2
appear in the display
These are error codes and protection codes. See the
CONTROL PADS ON THE DEHUMIDIFIER section.
18

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MDDG-20DEN7-QA3 and is the answer not in the manual?

Midea MDDG-20DEN7-QA3 Specifications

General IconGeneral
BrandMidea
ModelMDDG-20DEN7-QA3
CategoryDehumidifier
LanguageEnglish

Related product manuals