Lifting angle
The position should be provided with an at
least 50mm thick wood block, cloth or hard
paper, to avoid damages to the unit.
The position should be
provided with an at least
50mm thick wood block,
cloth or hard paper, to
avoid damages to the unit.
Handling of the unit
The angle of inclination should not be more than 15ºwhen carrying the unit, to avoid overturn of the unit.
a. Rolling handling: several rolling rods of the same size are placed under the base of the unit, and the length of each rod must be
more than the outer frame of the base and suitable for balancing of the unit.
b. Lifting: the strength lifting rope (belt) can bear should be 4 times the weight of the unit. Check the lifting hook and ensure that it is
firmly attached to the unit. To avoid damages to the unit, the contact position of the unit and lifting rope should be provided with an at
least 50mm thick wood block, cloth or hard paper. Any person is not allowed to stand below the unit when lifting it.
The position should be
provided with an at least
50mm thick wood block,
cloth or hard paper, to
avoid damages to the unit.
To Next Page
Loading...
