Midea MISSION2 3D INVERTER Series User Manual

Maintenance and
Disassembly
 Page 49 
MOBA01-09HFN1-BT0W
Procedure Illustration
1) Turn off the air conditioner and the
power breaker.
2) Remove the screws of the big handle
and then remove the big handle
(1 screw) (see CJ_BA01_INV_001).
3) Remove the screws of the top cover
and then remove the top cover (3
screws). One of the screws is located
underneath the big handle (see CJ_
BA01_INV_002).
CJ_BA01_INV_001
CJ_BA01_INV_002
Note: This section is for reference only. Actual unit appearance may vary.

Midea MISSION2 3D INVERTER Series Specifications

General

Brand	Midea
Model	MISSION2 3D INVERTER Series
Category	Air Conditioner
Language	English