EasyManua.ls Logo

Midea MY-CH502A

Midea MY-CH502A
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
04
04
Check whether gasket, float valve and anti-block
shield are clean. If they are stained, clean them
immediately.
1
2
3
4
5
6
Take out the inner pot, and put food and water in
the inner pot. Total amount of food and water shall
not exceed the MAX level of inner pot height.
Check whether the anti-block shield becomes loose. If yes,
tighten it instantly.
After inspection, mount the gasket component to the upper
cover correctly.
Before first use, please take out all accessories from the cooker
body and read the User Manual carefully. Special care must be
given to use directions and cautions to avoid any damage to
property and/ or injury.
Hold the cover handle firmly with a hand, rotate the cover to the
opening position in the clockwise direction and lift the cover.
After putting on the upper cover, rotate it anti-clockwise to the
locking position; Make sure that it is rotated in place, otherwise,
the cooker will not cook.
When cooking, the total amount of rice and water shall not
exceed the maximum level of inner pot.
Never boil laminated food (e. g. laver, kelp, etc.) and shattered
food (e. g. corn residue and oatmeal), as they may easily clog the
anti-block shield.
Before that, be sure to remove any foreign object and water on
the outer surface of the inner pot and also on the inner surface of
the cooker;
After putting in, rotate the inner pot lightly left to right to ensure
good contact between the inner pot and heating plate.
Cooking Preparation
After switch-on, a warning tone will sound, indicating that the unit
enters standby state.
This tone can be heard after switch-on and when completing
opening and closing.
Open the cover correctly
Put the inner pot in the pressure cooker
Close the cover completely
Switch on

Related product manuals