MCAC-RTSM-2011-12 Midea Combo Type Heat Pump Water Heater Technical Manual
33
2.1.2 After powered on, the display lights up. Users can operate the unit through the buttons under the
display for different modes. Emptying: If the unit needs cleaning, moving etc, the tank should be
emptied. Method: See Figure 2.1.2
Close
Open
Drainpipe
Open
Cool water inlet
Hot water outlet
Close the cool water inlet, open the hot
drainpipe.
water outlet and open the nut of
After emptying, please close the nut
of drainpipe
Close
Drainpipe
Emptying
NOTE: The outlet water temp. may be very high when emptying, beware of your body for burns.
2.2 Operation
2.2.1 Control Panel Explanation
2.2.2 Display Explanation
To Next Page
Loading...
