Midea UR-BC123CM-ST - Sensor; Thermostat; 8.6 Compressor case

Service Manual, 2017-02
22 / 36
Sensor
Sensor in freezing chamber
None
Sensor in refrigerating chamber
None
Sensor in Variable temperature chamber
None
ambient temperature senser
None
Thermostat
1. as shown in the picture, dismantle the temperature
induced tube from the evaporator
2. use screwdriver to remove the screws of thermostat
3. pull out rotary knob and unplug the wiring connector,
then change the thermostat
8.6Compressor case
Piping system in the compressor case
1.compressor
5.suction pipe