V6-i VRF 50/60Hz
62
Midea V6-i Series Service Manual
Menu mode function:
Table 5-2.3: Menu mode function
All indoor units running in cooling mode
If all indoor units in the system are the 2nd generation indoor units, all the indoor units
will run in heating mode. Once there is one or more old indoor unit in the system, all the
indoor units will run in forced cooling mode
The system does not check the indoor units’ number.
Only available for outdoor unit with two compressors. If one of the two compressors fails,
the other compressor will keep running for up to 4 days and then stop automatically.
It is only used in maintenance process. The digital display displays “R006”, and all solenoid
valves are opened and EXVs are opened to the maximum steps.
Cleaning history error codes
Fahrenheit degree setting (
o
F)
Celsius degree setting (
o
C)
Exit auto power save mode
Enter auto power save mode
Auto snow-blowing mode 1 (customized)
According to outdoor ambient temperature (T4), the outdoor fan(s) periodically stop for
15 minutes and run for 2 minute
Auto snow-blowing mode 2 (customized)
According to outdoor ambient temperature (T4), the outdoor fan(s) periodically stop for
30 minutes and run for 2 minute
Exit auto snow-blowing mode
The digital display will display “IdXX”, “XX” stands for VIP address, use UP / DOWN button
to change the VIP address and press OK button to confirm the specified VIP address.