Midland ct210 User Manual

ENGLISH
16
time out
transmission
TOT? 12 OFF-270 SAME AS ABOVE
type of scanning
SCANS?13 TO/CO/SE
Turn encoder to select Press
to confirm
Press twice
to exit
voice function
activation
VOICE?14 ON/OFF
Turn encoder to select
Press
to confirm
Press
to exit
shift repeater
DIFFR? 15 0-70.995
Input frequency or turn encoder
Press
to confirm
Press
to exit
ctcss/dcs rx/tx
C-CDC? 16 See CTCSS chart SAME AS ABOVE
ctcss/dcs only rx R-CDC? 17 See CTCSS chart
Turn Encoder to select
Press
to confirm
ctcss/dcs only rx
T-CDC? 18 See CTCSS chart SAME AS ABOVE
+ / - shift
S-d? 19 +/-/cancel
Turn encoder to select
Press
to confirm
Press
to exit
frequency step
selection
STEP? 20
5k/10k/6.25k/
12.5k/25k
SAME AS ABOVE
wide/narrow band
selection
N/W ? 21
Wide
Narrow
SAME AS ABOVE
Exit VFO/MR
Note: parts from 16 to 21 are available only in Frequency mode.
In Channel mode only parts from 1 to 15 are active.
To pass rapidly from Frequency to Channel mode or vice versa, switch on the unit
and hold down the
button.
NAME ON/OFF
Turn encoder to select
Press
to confirm
Press to exit

Midland ct210 Specifications

General

Brand	Midland
Model	ct210
Category	Two-Way Radio
Language	English