10 | Midland G18 instruction guide
Battery recharge
G18 is equipped for using a 7,4V Li-ion rechargeable battery pack, which
can be recharged by connecting the socket of the AC/DC wall adaptor to
a mains power socket and inserting the jack of the wall adaptor into the
desktop charger plug.
It takes 4 hours to fully recharge the radio.
The led of the desktop charger indicates the status of the recharge:
Red = charging,
Green = full charge
For maximum battery life, we recommend you to charge the battery pack
when the G18 is off and the battery pack is fully discharged.
! Using a different battery charger other than the one specified can
cause damage to your device or may even cause explosions and per-
sonal injuries.
The Battery power saving feature enables a reduction in consumption of up
to 50% and saves the battery life. If it has been set, it automatically activates
when the transceiver does not receive any signal for more than 5 seconds.
Power saving can be disabled only through the Programming software.
To Next Page
Loading...
Need help?
General
