12 | Midland G18 instruction guide
Roger Beep (end transmission tone)
When the PTT button is released, the radio will beep to confirm to other
users that you’ve finished your transmission and that they can start
talking.
Roger Beep is disabled by default and can be activated through the pro-
gramming software.
Alarm function (Emergency)
By pressing the Emergency button, the radio will switch to Alarm Emer-
gency mode.
G18 will switch to transmission for 30 seconds by generating a sound
alarm, then for further 30 seconds will remain in tx to allow the user to
communicate his status.
At the end, the radio will switch to reception.
If needed, the Emergency call can be repeated.
To Next Page
Loading...
Need help?
General
