Midland NEPTUNE 100 - Manual GPS Data Entry; GPS Receiver Compatibility; Keypad Beep Configuration

22
ENGLISH
10.3 GPS
Coordinates (latitude and longitude) can be manually inserted without any connection to a GPS
antenna. Follow these steps:
•
Keep pressed MENU/SELECT until the display indicates DSC CALL
•
Scroll through the functions and select GPS; conrm with the MENU/SELECT button
Latitude and longitude may be modied by pushing MENU/SELECT and scrolling the digits with
UP/DOWN
You will be asked UTC (Universal Time Coordinate) Tempo Universale Coordinato)
•
With the UP/DOWN keys scroll through the digits and insert UTC
•
Conrm by pushing MENU/SELECT
To return to radio mode, press PTT, select EXIT which is present in every menu or wait for 1 second
and the radio will automatically exit.
For a better efciency of the DSC service, we suggest you insert coordinates and time. If
NEPTUNE 100 is connected to a compatible GPS receiver (GR213), the setting of these data is
not compulsory.
10.4 GPS SELECT
NEPTUNE 100 is compatible with almost all the GPS receivers available on the market. Verify the
compatibility with your receiver.
GPS receivers use different strings; in the NEPTUNE 100 menu you can enable/disable many
types of strings.
According to your needs, select the desired string following this procedure:
•
Hold down MENU/SELECT until DSC CALL appears on the display
•
Scroll the list of functions with the UP/DOWN keys
•
Select GPS SELECT and conrm by pushing MENU/SELECT
Strings are all active by default, therefore you have to disable the undesired ones.
Select it with UP/DOWN keys and conrm by pushing MENU/SELECT.
Select ON or OFF and conrm.
To return to radio mode, push PTT, select EXIT in every menu or wait for 1 second and the radio
will automatically exit.
10.5 “Beep” (Enable/disable keypad beep)
Everytime a button is pressed, the radio emits a signal as conrmation or to warn about wrong
operations.
To disable these beeps, follow this procedure:
•
Hold down MENU/SELECT until DSC CALL appears on the display
•
Scroll the list of functions with the UP/DOWN keys
•
Select SYSTEM and conrm by pushing MENU/SELECT
•
Scroll the list of functions with the UP/DOWN keys
•
Select KEY BEEP and conrm by pushing MENU/SELECT
if this function is active, on the display ON will appear; while if it’s disabled, the display will show
OFF. Select the desired setting.
To return to radio mode, push PTT, select EXIT in every menu or wait for 1 second and the radio
will automatically exit.
With long pressures of the MENU/SELECT button, you will exit menu by menu.