1.2.d Environmental
Pay attention to ambient conditions – although NEPTUNE 100 is designed to operate
under the most severe conditions, it is important to avoid exposure to environments that
are excessively humid or dusty, or to temperatures outside the –15 to +55°C range. Also
avoid exposure to direct sunlight.
Avoid jarring and excessive vibration – NEPTUNE 100 is built to resist mechanical shock
and vibration as long as these are within the norm for any electrical device.
Do not use this device in potentially explosive environments. A single spark may cause
an explosion.
1.3 ETSI Information
ETSI (European Telecommunications Standards Institute) has established specic requirements
(EN 301 025-2/3) for marine transceivers with DSC function class ”D”. For use on non-SOLAS
vessels.
1.4 Assistance
We urge you to write the serial number of your transceiver in the space provided below. This
number is found on the back panel of the transceiver and will be useful in the event of repair/
assistance and/or loss and/or theft..
Serial number ________________________________
1.5 Manual Notes
Writing of this manual has been completed with the intention of supplying information that are
comprehensive, precise and up-to-date. Nevertheless, the manufacturer does not assume
responsibility for the actual correspondence with the product and for the consequences of possible
errors caused by factors over which it has no control. Equipment and options described may differ
according to varying countries.
E. and O.E.
All rights reserved.
To Next Page
Loading...
Need help?
General
