4. INSTALLATION
4.1 Contents of package
Before using your transceiver, ensure that your package is complete and contains:
Mounting bracket1.
DC power cord with integrated protecting fuse2.
Knobs (2 pieces)3.
Mounting piece for microphone4.
Self-threading screws for mounting bracket (4 pieces)5.
Screws for mounting bracket (4 pieces)6.
Washers (4 +4 pieces)7.
Nuts (4 pieces)8.
Self-threading screws for microphone mount (2 pieces)9.
Screws for the microphone mount (2 pieces)10.
Washers (2 +2 pieces)11.
Nuts (2 pieces)12.
Grained washers (2 pieces)13.
Nuts (2 pieces)14.
Flush mounting kit15.
Cable for GPS receiver16.
Certicate of warranty and instruction manual (not shown)17.
Depending on the model, some parts may already be attached/connected to the device. In any
case, if any parts are missing, immediately contact your supplier.
To Next Page
Loading...
