13
High/Low Power Selecting (In Power OFF Mode)
Change Hi/Lo power mode by pressing PTT+CALL+MENU+POWER at the same time
(For bank2, bank1 is locked in low power mode).
High Power, LCD displays Hi.
Low Power, LCD displays Lo.
Roger Beep
1. Briefly press the menu key to enter the menu.
2. Then press ▲ or ▼ key to select and stop when the LCD displays “rb”, and press the
key to confirm and enter Roger Beep setting.
3. Press ▲ or ▼ key to choose ON/OFF. Briefly press the key to confirm.
Keytone Setting
1. Briefly press the MENU key to enter the menu.
2. Then press ▲ or ▼ key to select and stop when the LCD displays “bp”. Press the key
to confirm and enter keytone setting.
3. Press ▲ or ▼ key to choose ON/OFF. Briefly press the key to confirm.
Wide/Narrow Band
Wide/Narrow Band select only through PC programming.
USB Charger
Charging power for cellphones and other devices.
Speaker Selection
When the radio is ON, press +▲ to switch “HO AF” or “HF AO”.
“HO AF” activates base unit speaker. Microphone speaker will be OFF.
“HF AO” switches base unit speaker off. Microphone speaker will be ON.
Dual Speaker Function (Bank 2)
“HO AO” means base and mic speaker ON. To activate this: +▼ button.
Note: In BANK 1, 477MHz this operation cannot be activated.
To Next Page
Loading...
