SYN-TECH III P25 PORTABLE RADIO
SERVICE MANUAL
7-2
7.2 USAGE
This procedure for the radio is for disassembly only; reverse the order of the steps to reassemble the
radio. Important notes and warnings are given regarding reassembly.
The parts location diagrams in the parts lists may help with the disassembly/reassembly procedure.
7.3 DISASSEMBLING THE RADIO
The Syn-Tech III P25 Portable Radio consists of a front panel, rear panel and accessory boards between
them. The radio is secured together by screws and washers accessible in rear panel assembly. The
required screws and washers are described below:
DESCRIPTION QTY P/N
SCREW STL ST/SOX M2X14 6 5307-1272-0214
WASHER THIN STL ST/SOX 2X4.5X0.5 6 5312-0072-0207
WASHER SPRING STL ST/SOX 2X4.4X0.5 6 5312-1072-0206
O-RING SI Ø1.3x2.7x1.2 6 6008-0534-1004
The screws at the rear panel are removed as shown below.
After the screws are removed, the front and rear panels are separated as shown below.
To Next Page
Loading...
