Midtronics xMB-9640

www.midtronics.com
5 – Settings
xMB-9640
21
2. Enable Power to Serial Bus. Check this box to enable Bar Code Scanner when Barcode Scanner
is connected to unit.
3. Tap to return to the Shop Information screen.
Date/Time Settings
1. Tap to access the Date/Time setting defaults.
Select Time Format
12 Hour
Select Date Format
10/18/2016
Select Time Zone
EST
Set Date
Set Time
Select Time Format
12 or 24 Hour Format
Select Date Format
Month/Day/Year, Day/Month/Year, or Year/Day/Month
Select Time Zone
Time zone in which the analyzer will be operated.
Set Date
Tap  or  to enter the month, day, and year. Tap Set to save the date or Cancel to exit
without saving.
Set Time
Tap  or  to enter the hours, minutes, and AM/PM. Tap Set to save the date or Cancel to
exit without saving.
2. Tap to return to the Shop Information screen.