SPEAKER TESTS
The SPEAKER TESTS provide audio signals to test the loudspeakers. Use these tests to verify operation
of the audio system components. Select one of the tests and press START to begin the test.
SPEAKER TEST SUB-MENU
The channel tests use voices to verify speaker locations. Use the 100 Hz tone to check the sub-woofer.
PLAY TUNE test uses game sounds to check that the speakers are correctly phased. "Muddy', weak or
distorted sound quality during this test may indicate crossed or out-of-phase connections to the speakers.
NOTE: Check the volume setting before testing. Increase the volume level to fully test the speakers.
Remember to return the volume to its previous level after the sound tests are concluded.
2-13
To Next Page