Operation
50
Switching on
Turn on the tap, if it is turned off.
Press the button until the LED lights up.
Close the door (the button's LED will light up).
As soon as the dishwasher is ready for operation, the display
changes to show the last selected programme,
e.g.:
Selecting a programme
Choose your programme according to the type of load and how dirty
it is.
Shortcut buttons
The most regularly used programmes can be selected via shortcut
buttons , or . The shortcut buttons can be freely
customised to suit individual needs (see "Further Settings").
The first three programmes from the Programme chart are allocated
to the shortcut buttons as the factory default.
Select a programme using the shortcut buttons.
The shortcut button's LED will light up and the Start/Stop button's
LED will flash.