Operation
52
Starting a programme
Press the Start/Stop button.
The Start/Stop button's LED will light up and the button's LED will
go out.
A programme can no longer be changed after it has been started.
A programme can either be interrupted (see "Interrupting a
programme") or cancelled (see "Cancelling a programme").
Programme
sequence
indicator
After the start of a programme, the wash phase description, and for
10 seconds Programme running are shown in the display.
During the programme cycle the and arrow buttons can be used
to switch between the wash phase and the target temperature or the
actual temperature in the second line of the display.
The time remaining is shown in the third line of the display.
To Next Page
Loading...
Need help?
General
