Additional functions
57
Drying support
To achieve better drying results, the dishwasher door will
automatically open a few centimetres at the end of the programme.
This function cannot be activated for all programmes (see
"Programme chart").
Drying support can be activated or deactivated for the selected
programme, even if it is switched on or off permanently under
Settings , Drying".
The setting adopted will then be applied once for the programme
selected. It will go out at the end of the programme.
Switch the dishwasher on with the button.
Select the programme you require (see "Operation, Selecting a
programme"). The Start/Stop button's LED will flash.
Press the OK button.
If Delay start has been activated under "Settings , Delay start", the
following will appear in the Selection menu:
Select Drying support and confirm your choice with the OKbutton.
If Delay start has been deactivated under "Settings , Delay start",
the options for drying support will appear immediately.
– No
Drying support is deactivated for the selected programme.
– Yes
Drying support is activated for the selected programme.
The opposite of the setting which has been adopted under Settings ,
Drying will appear as an option in the display.
Pressing the OK button will adopt the option.
To Next Page
Loading...
Need help?
General
