Operation
55
Cancelling a programme
Only cancel a programme which has already started if strictly
necessary, e.g. if you want to change the programme.
In the event of a fault the programme will be cancelled automatically.
Caution! The wash load and the interior of the dishwasher may
be hot.
Danger of scalding and burning!
Press the Start/Stop button.
The following will appear in the display:
Select Yes and confirm your choice with the OKbutton.
The programme will only be cancelled when Yes is confirmed.
If there is no further input approx. 20 seconds after the Start/Stop
button has been pressed, the display will revert to the programme
sequence.
The following message appears in the display:
If you change the programme and the cleaning agent compartment
flap is open, add more cleaning agent as necessary.
To Next Page
Loading...
Need help?
General
