The piping has now been rinsed through. You can now
prepare drinks or switch off the machine.
Water container
Empty the water container daily and fill to the max. level with
fresh, cold tap water just before use.
Waste container
Clean the waste container daily. Coffee remains can turn
mouldy.
There will probably also be residual water in the waste
container left over from the brewing and rinsing process.
^
Lift the waste container and pull it forwards to remove.
Clean the waste container with hot water and a little
washing-up liquid or in the dishwasher, and dry with a cloth.
^
Clean inside the waste container compartment, especially
at the top right and left-hand sides near the small windows
(sensors). It is important to keep these sensors clean, as
otherwise the machine will not recognise the waste
container is present or that it requires emptying.
^
Push the waste container back into the machine as far as it
will go.
When you push the waste container into the machine, you
also push a lever backwards. This tells the machine that
the waste container has been put back. There will be a little
resistance as you do this. This is quite normal.
Cleaning and care
52
To Next Page
Loading...
