Miele CVA 7440 Operating And Installation Instructions

Frequently Asked Questions
Problem Possible cause and solution
F73 or
Check the brew unit
The brew unit cannot be positioned correctly in the
start position or is soiled. It is not possible to press
the ground coffee.
 Check whether you can remove the brew unit.
 If you can remove the brew unit, rinse it under
running water.
 Push the coffee ejector of the brew unit into the
correct start position (see image).
 Replace the water container in the coffee machine
and close the door. Do not insert the brew unit.
Switch the coffee machine on.
This will initialize the brew unit drive and put it back
into the start position.
 When Insert the brew unit appears in the display, put
the brew unit back in the coffee machine. Close
the appliance door.
 If you cannot remove the brew unit, switch the
coffee machine off. Wait for
approximately2minutes before switching the
machine back on again.
71

Miele CVA 7440 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Milk adding type	Automatic
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	White
Used capsules container capacity	17 pc(s)
Current	10 A
AC input voltage	220–240 V

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	448 mm