Miele CVA 7440 Operating And Installation Instructions

Frequently Asked Questions
Problem Possible cause and solution
A maintenance program
is prematurely aborted
and the following
appears in the display:
Push the water container in
until it engages.
The water container has not been filled and inserted
correctly.
 Check that you have filled to the correct mark.
The symbols marked on the water container indicate
the amount of water required for the
Descale the appliance: and Clean milk pipework:
maintenance programs.
 Fill the water container up to the relevant mark and
restart the process.
F233 The cup rim sensor is not inserted or is incorrectly
inserted.
If the central spout is moving upwards and the cup
rim sensor is bumped, e.g., with a cup, the cup rim
sensor loses its reference position.
 Confirm the message withOK.
 Refit the cup rim sensor.
Cup rim detection remains inactive and the central
spout stays in the top position until the coffee
machine is next switched on. Cup rim detection is
reinitialized during the next switch-on operation.
F307or Remove the milk
valve and clean it
The milk valve is faulty.
 Remove and clean the milk valve (see “Cleaning
and care – Removing and cleaning the milk valve”).
72

Miele CVA 7440 Specifications

General

Product type	-
Built-in grinder	Yes
Capacity in cups	1 cups
Milk adding type	Automatic
Coffee input type	Coffee beans
Coffee maker type	Fully-auto
Milk tank capacity	0.7 L
Appliance placement	Built-in
Water tank capacity	2.7 L
Coffee beans capacity	300 g
Reservoir for brewed coffee	Cup
Cord length	2 m
Control type	Touch
Product color	White
Used capsules container capacity	17 pc(s)
Current	10 A
AC input voltage	220–240 V

Weight and Dimensions

Depth	475 mm
Width	595 mm
Height	455 mm
Installation compartment depth	500 mm
Installation compartment width	560 mm
Installation compartment height	448 mm