Cleaning and care
31
Resetting the operating hours
count
er for the grease filters
After cleaning, the operating hours
coun
ter needs to be reset.
Whilst the fan is switched on, pr
ess
the operating hours control for
approx. 3 seconds until only the 1 is
flashing.
The grease filter symbol goes out.
If the grease filters are cleaned before
the oper
ating hours counter has
reached its maximum:
P
ress the operating hours control
for approx. 6 seconds, until only
the 1 is flashing.
NoSmell active charcoal filters
With recirculation mode, two charcoal
filt
ers must be fitted in addition to the
grease filters. These are designed to
absorb cooking odours.
Replacement charcoal filters can be
obtained from Miele or via the internet
at www.miele-shop.com (depending on
country). See the back of these
instructions for contact details, and
"Technical data" for type and reference
number.
Fitting and replacing the charcoal
filt
ers
The slots for the charcoal filters are
loca
ted above the grease filters.
Remo
ve the cover. It is held in place
by magnets.
Unwr
ap the charcoal filters.
Insert the charcoal filters in the slots.
Refit the cove
r.
When fitting
for the first time, activate
the operating hours counter (see
"Operation").
To Next Page
Loading...
