Miele DA 3660 - Con@ctivity 2.0 Setup and Activation; Installing the Con@ctivity Dongle; Initiating Rangehood Activation

Activating Con@ctivity 2.0
54
Installing the Con@ctivity 2.0
dongle
In order for the Con@ctivity 2.0 function
t
o be used, the cooktop must be fitted
with the Con@ctivity dongle.
 Please
read the instructions for the
Con@ctivity 2.0 dongle before
installation.
Activating Con@ctivity 2.0
In order to use the Con@ctivity 2.0
func
tion, radio contact between the
cooktop and the rangehood must be
activated.
Both appliances must be installed and
oper
ational.
Wireless connection must be activated
on the r
angehood and the cooktop at
the same time. Activation on the
rangehood is described below.
Activation on the cooktop is described
in the relevant Operating instructions.
Please refer to the Operating
instructions before starting.
Activate the rangehood first, then the
cooktop.
Activating the rangehood
Signing on/off is carried out with the
deflect
or plate retracted.
 Remo
ve the grease filters.
The controls are accessible via the slots
for the grease filters.
 The
cooktop and rangehood must be
switched off.
 P
ress the run-on option control
515 for approx. 10 seconds until
the indicator for the power setting 1
lights up.
 Then press in turn,
– the "" contr
ol,
– then the "" contr
ol,
– then the lighting control .
If the remote control is already
activated, 2 and 3 will light up
constantly. If there is no wireless
connection, 2 and 3 will flash at the
same time.
 T
o activate Con@ctivity 2.0, press the
"" button.
The search for a signal will start.
 Meanwhile, start the activation of the
cooktop.