Connection for air extraction
53
Recirculation mode
The silencer needs to be positioned
between the e
xhaust connection and
the directional unit . Ensure there is
adequate space in the tower for fitting
it.
Air extraction with external motor
To minimise noise from the motor in the
kitchen, the silencer should be
position
ed in front of the external motor
if possible, or, if the ducting is long,
above the exhaust connection inside
the rangehood . In the case of an
external motor located inside the
house, fitting a silencer behind the
external motor reduces the noise of
the motor outside the house.
To Next Page
Loading...
