Installation
49
up for recirculation. A conversion kit,
avail
able of from Miele, is required for
operating the rangehood in recirculation
mode. You will also need two charcoal
filters (see "Technical data").
Conversion kit DUU 150 with a plastic
grille is suitable for fitting in a non-
visible ar
ea at the top of the wall unit.
Conversion kit DUU 151 with a
stainl
ess steel grille is recommended if
the grille is to be fitted in an area which
is visible.
Fit the conversion kit as described in
the installation instructions supplied
with the kit. Mak
e sure that the slats
in the exhaust grille point towards the
centre of the room and not towards a
wall or the ceiling.
A non-return flap is not used in
recirculation mode.
Fi
t the charcoal filters (see "Cleaning
and care").
Mains connection
Refer to the notes in “Electrical
c
onnection” and “Warning and
Safety instructions” before
connecting to the electricity supply.
F
or appliances connected to an
external motor (...EXT models):
Connect the rangehood and the
external motor using the control
cable and the six-pole plug
connector.
Plug
the mains connection cable into
an electrical socket.
To Next Page
Loading...
