Installation
45
T
ighten the fixing screws from below.
When fitting a 900 mm wide
r
angehood in a 600 mm wide wall
unit, insert the two rear screws at this
stage.
If the wall unit has side sections, you
will also need to secure it to the base
on either side.
Reconnect the rangehood to the
electricity supply.
The fan switches on again.
P
ress the On/Off control on the
rangehood or the "" control on the
remote control repeatedly until the
fan switches off.
The motor will switch off. The deflector
plat
e goes back in.
To Next Page
Loading...
