Miele DA 3660 - Starting Remote Control Pairing

Signing on/off the remote control
57
 Co
nfirm the signing off procedure by
pressing the run-on option control
515 on the rangehood. All
indicators will go out.
Please bear in mind that disabling the
signal will also disable any
Con@ctivity 2.0 function and this will
have t
o be activated again.
Starting the signing on procedure
 In signi
ng on/off mode press the ""
control on the rangehood first and
then on the remote control.
The search for a signal will commence.
The r
emote control LED will flash
steadily.
After approx. 30 seconds the remote
contr
ol LED will flash on and off 4 times
at short intervals. The connection has
been established. The LED will go out
after a short while.
 Confirm signing on with the
r
angehood run-on option control
515. All indicator lights will go out.
The remote control can now be used.
If you do not confirm your selection
within 4 min
utes, activation will not take
place.
Cancelling the signing on procedure
 If it is not possible t
o sign on, the
procedure can be cancelled by
pressing the run-on option control
515 on the rangehood and on the
remote control.
 The
signing on procedure must then
be repeated. To do this, the
rangehood and the remote control
must first be signed off.