Before using for the first time
26
Finish activation on the cooker hood
When successfully connected the B will
go out, and the 2 and 3 will light up
constantly.
Confirm activation with the run-on
control. All the indicator lights will
go out.
The Con@ctivity 2.0 function is now
ready for use.
If confirmation is not carried out within
4minutes, activation will not take place.
Activation only takes place once. If
appliances are disconnected from the
mains, for example during a power
cut, the activation process does not
need to be repeated.
Activation failed
If the wireless connection cannot be
established despite activating the
cooker hood and the hob, both
appliances must first be deactivated
and then re-activated.
Deactivating wireless connection
The hob and cooker hood must be
switched off.
Press the run-on control for
approx. 10 seconds until 1 lights up.
Then press in turn:
– the control,
– then the control,
– then the lighting control.
The cooker hood is now in signing on/
off mode.
If a wireless connection has already
been established, 2 and 3 will light up
constantly.
To Next Page
Loading...
