To switch the fan on
^
Press the On/Off touch control.
The fan runs at power level "II".
The indicator lamp will come on.
To select a power level
^ Use the – / + controls to select the
power level required.
Touch control + = higher setting
Touch control – = lower setting
Depending on the intensity of the
cooking vapours, levels I to III are
usually sufficient for normal cooking.
Intensive setting
When frying or cooking food with a
strong aroma, you may wish to select
the Intensive setting for a short period.
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level III.
^
To set this option, both the fan and
the cooktop lighting must be
switched off.
^
Press the run-on option touch control
for approximately 10 seconds. The
first fan setting indicator will light up.
^ Then press, one after the other,
– the cooktop lighting touch control,
–
the – touch control, and
–
the cooktop lighting touch control
again.
Operation
15
To Next Page
Loading...
