Adjusting the height of the
canopy
The height adjustment feature on the
canopy can be used to:
–
adapt the height of the rangehood to
suit the installation conditions.
–
adjust the working area underneath
the rangehood to the height of the
user.
–
maximise vapour extraction by
lowering the canopy during
particularly intensive cooking.
– create more working space above
the cooktop by raising the canopy
when required.
The height of the canopy can be
adjusted by up to 260 mm (this can be
extended to 300 mm, see “Installation”).
^
The canopy can be raised or lowered
by touching the Up or Down controls
briefly.
^
Pressing the control again stops the
canopy.
If it is not stopped, the canopy will
automatically be raised or lowered to its
fullest extent.
Repeated use of the height
adjustment feature over several
minutes will cause it to cut out. It can
be used again after a pause.
Operation
21
To Next Page
Loading...
